Description

For over 30 years, the Trimax Topper S3 has set the standard in pasture topping, now offering advanced features and upgrades for superior performance. Designed to cut pasture grass efficiently, the Trimax Topper S3’s small-diameter blades rotate at high speeds, delivering more cuts per meter compared to other pasture toppers. This high-speed cutting reduces travel distance for ejected material, while the machine’s generous under-body clearance means lower horsepower requirements. Equipped with Trimax’s exclusive Anti-Block System (ABS), it prevents blockages around spindles, even in tough conditions. The new automatic belt tensioner eliminates the need for manual adjustments, enhancing spindle drive power in tall grass. With a compact front-to-rear design, the Trimax Topper S3 mounts close to the tractor for a reduced turning radius, ideal for maneuvering in tight spaces and working with smaller tractors. Plus, with an industry-leading 3-year warranty, the Trimax Topper S3 outperforms any other pasture topper on the market.

Features

Easier Maintenance

• New latch system provides easier access to drive system and access to roller bearing grease nipple has been improved.

Auto Belt Tensioning

• Eliminates the need for belt adjustments and improves drive to the spindles and blades in longer grass.

Stand On Belt Covers

• Provides safe and easy access to the rear of the tractor when coupling.

Accurate Height System

• Height indicators are clearly displayed allowing for accurate and easy in field height adjustments.

Low Hp Requirements

• The open deck design for grass processing, efficient belt drive system, and a short mower front-to-rear allows for use on lower HP tractors.

3 Year Warranty

• We aim to build mowers that last and we back this up with a 3 year warranty which also includes the spindles and gearboxes. Our robust design, coupled with our experienced service and support network, ensure minimum downtime and more productivity.

LazerBladez™

• Achieves a superior cut and finish and is more cost-efficient than cylinder reels or solid blade beams.

Advanced Design

• The Topper is short front to rear with high underbody clearance and a clean ejection of cut grass.

Rear Roller

• Full-width rear roller prevents scalping, permits the edge of the mower to be run along curbs, adds to the overall safety, and produces striping.

Anti-Block System

• Deters long grass from catching and binding around the spindle restricting movement.

Improves Feed Quality

• Controls poor quality pasture by removing seed-heads and thistles and prevents reoccurrence.

High Spindle Speeds

• Results in significantly more cuts per forward meter of travel and a much finer clip.

Models

Topper 237 Topper 282

Specifications

Topper 237 Cutting Width – 2.32m (91″) Overall Width – 2.48mm (97″) Overall Length – 1.32m (52″) Height – 0.99m Cut Height Range – 20-160mm (3/4″ – 6 1/4″) Number of Blade Spindles – 4 Approx Weight – 643kg Minimum PTO Output *- 37hp Warranty – 3 Years Workrate (6 mph) – 1.39 hectares/hr *Minimum PTO output is a guide only. Requirement varies with the type of work and the terrain. Topper 282 Cutting Width – 2.74m (108″) Overall Width – 2.91m (114″) Overall Length – 1.39m (54″) Height – 0.99m Cut Height Range – 20-160mm (3/4″ – 6 1/4″) Number of Blade Spindles – 4 Approx Weight – 685kg Minimum PTO Output *- 45hp Warranty – 3 Years Workrate (6 mph) – 1.64 hectares/hr *Minimum PTO output is a guide only. Requirement varies with the type of work and the terrain.  

Description

A high-utility heavy duty powerhouse! Tough enough for roadsides, efficient enough for open space management, and versatile enough to handle everything in between, the Trimax Force is the multitool mower you need to produce a pristine cut and superior finish in almost any application. Strong and adaptable flail mower with a wide range of options available for configuring and customising your machine, the Trimax Force can be tailored to perfectly suit all your mowing and mulching needs.

Features

3 Year Warranty

• We build mowers that last and they’re supported with a 3 year industry leading warranty.

Mow and Mulch with One Machine

• Mow grass to a fine finish and mulch prunings up to 90 mm in diameter with one machine.

Discharge Control

• Coarseness of mulch is controlled by the height of the rear flap, fully open for easy service access.

Smooth Profile

• New internal rotor bearings create a smooth external profile and provide a closer cut around obstacles.

Robust Roller

• Replaceable robust roller with 5mm-thick walls for tough applications.

Pruning Guide

• Helps direct prunings and other foliage into the front aperture of the mower.

Low Maintenance

• Easily accessible grease locations and maintenance-free features for simple servicing.

Maintenance – Free Roller Bearings

• New highly-rated sealed roller bearings require no regular greasing.

Replaceable Skids

• Wear skids on trailing arms prolong mower life in demanding terrain.

Replaceable Internal Liner

• A 6mm (1/4″) replaceable internal liner reduces noise and increases mower life.

Product Options

Heavy Duty Roller

• Upgrade from the 5mm thick roller to a roller with 11mm wall thickness. Suitable for more demanding applications.

Heavy Duty Liner

• Increase the life of your replaceable internal liner by three times with a heavy-duty internal liner, suitable for high wear applications.

Front Mount

• Available in front mount three-point linkage configuration for increased visibility. Suitable for tractors with front PTO drive only.

Left Hand or Right Hand Offset

• Force can be configured with a left-hand or right-hand offset for increased over-the-shoulder visibility in special applications. Left-hand offset is recommended for roadside use. (Available only for 175, 205, and 235.)

Storage and lighting Kit

• The Storage & Lighting Kit mounts a toolbox, LED road lights and safety triangle to the Force for commercial use.

Roller Scrapers

• Trimax roller scrapers operate with reduced tension but apply a constant pressure across the roller to assist with the cleaning of debris.

Hydraulic Side Shift

• Position directly behind the tractor or quickly offset by up to 500mm (19″) for easy transport and increased manoeuvrability. (Available only for 175, 205, and 235.

Models

Force 175 Force 205 Force 235

Specifications

Force 175 Cutting Width – 1730mm (68 1/8″) Overall Width – 2022mm (79 5/8″) Overall Length – 1149mm (45 1/4″) Cut Height Range – 0- 60mm (0- 2 3/8″) Approx. Weight – 785 kg (1730 lb) Minimum PTO Output – 40hp Flails – 24 Hydraulic Side Shift – Yes Force 205 Cutting Width – 2017mm (79 3/8″) Overall Width – 2310mm (91″) Overall Length – 1149mm (45 1/4″) Cut Height Range – 0- 60mm (0- 2 3/8″) Approx. Weight – 845 kg (1863 lb) Minimum PTO Output – 44hp Flails – 28 Hydraulic Side Shift – Yes Force 235 Cutting Width – 2296mm (90 3/8″) Overall Width – 2588mm (101 7/8″) Overall Length – 1149mm (45 1/4″) Cut Height Range – 0- 60mm (0- 2 3/8″) Approx. Weight – 900 kg (1984 lb) Minimum PTO Output – 49hp Flails – 32 Hydraulic Side Shift – Yes

Description

The new Ezeemow FX is the ideal partner for your compact tractor where versatility and robustness is required. Ezeemow FX has been designed to give you greater mowing versatility from short grass to heavy conditions.

Ezeemow FX can handle fine turf, small prunings and one meter high grass and scrub with minimal maintenance and maximum reliability.

This versatility makes the Ezeemow FX ideal for contractors, councils, roadsides, estates, and orchard applications. Ezeemow FX is compatible with tractors from 20 to 45hp and its compact dimensions allow manoeuvrability in tight corners.

Features

3 Year Warranty

• We aim to build mowers that last and we back this up with a 3 year warranty. Our robust design coupled with our experienced service and support network ensure minimum downtime and more productivity.

Rugged Construction

• Well thought-out design, high strength materials and robust monocoqular construction ensure the Ezeemow can withstand the harshest conditions and the most demanding operators.

Safety First

• Safety is of paramount importance when mowing in public areas such as parks, schools and roadsides. This is why Trimax has designed the Ezeemow to expel debris in a downward direction behind the mower.

Power Saving Flails

• The aerodynamic shape of Trimax’s unique Gamma™ flails means the tractor’s power is used for cutting grass or shredding vegetation, not for pumping air. This equates to lower horsepower requirements, allowing this mower to operate in difficult conditions when powered by a compact tractor.

Unique Design

• Ezeemow FX has been redesigned to allow more material to be processed within the mower increasing productivity.

Models

E2 135
E2 155
E2 185

Specifications

E2 135
Cutting Width – 1342mm (53″)
Overall Width – 1560mm (61″)
Overall Length – 583mm (23″)
Cut Height Range – 10-110mm (3/8″ – 4 3/8″)
Approx Weight – 180kg
Minimum Tractor Size – 17hp
Warranty – 3 Years

E2 155
Cutting Width – 1520mm (60″)
Overall Width – 1720mm (68″)
Overall Length – 583mm (23″)
Cut Height Range – 10-110mm (3/8″ – 4 3/8″)
Approx Weight – 200kg
Minimum Tractor Size – 20hp
Warranty – 3 Years

E2 185
Cutting Width – 1830mm (72″)
Overall Width – 2045mm (81″)
Overall Length – 583mm (23″)
Cut Height Range – 6-96mm (1/4″ – 3 3/4″)
Approx Weight – 225kg
Minimum Tractor Size – 22hp
Warranty – 3 Years

Description

The Trimax FlailDek FX offers a high performance alternative to the standard factory-fitted rotary mowing attachments found on John Deere, Kubota, Iseki, New Holland, Shibaura and Hustler out-front tractors. It has the ability to deliver an exceptionally clean cut and disperse clippings safely. FlailDek FX is suitable for sports grounds, roadsides, schools, parks and other fine turf applications.

Features

3 Year Warranty

• We aim to build mowers that last and we back this up with a 3 year warranty. Our robust design coupled with our experienced service and support network ensures minimum downtime and more productivity.

Rear Roller

• The full width rear roller prevents unsightly scalping and permits the edge of the mower to be run along kerbs and banks without fear of blade strike. The roller also adds to overall safety and produces a brilliant striping effect for those wishing to pattern their turf.

Unique Converter™

• Trimax’s unique and Patented Converter feature, when lowered, allows superb short grass cutting ability by creating airflow that lifts the grass before it’s cut. For work in heavy environments the Converter can be quickly lifted allowing more grass to be processed within the mower to increase productivity.

Power Saving Flails

• One of the many secrets of the FlailDek FX’s success is the exclusive Trimax Gamma™ flail. Formed from high tensile alloy steel and hardened for long life, the straight cutting edge produces a perfectly even cut. The aerodynamic profile reduces horsepower requirements, yet generates sufficient draught to prevent clogging, and lifts the grass for a clean cut. The low power requirements offer a huge advantage, especially in heavy conditions.

Models

FXU 135
FXU 155
FXU 185

Specifications

FXU 135
Cutting Width – 1342mm (53″)
Overall Width – 1560mm (61″)
Overall Length – 1095mm (43″)
Cut Height Range – 12-102mm (1/2″ – 4″)
Approx Weight – 210kg
Hydraulic Drive – N/A
Warranty – 3 Years

FXU 155
Cutting Width – 1520mm (60″)
Overall Width – 1720mm (68″)
Overall Length – 1095mm (43″)
Cut Height Range – 12-102mm (1/2″ – 4″)
Approx Weight – 225kg
Hydraulic Drive – Optional (Specific Tractors Only)
Warranty – 3 Years

FXU 185
Cutting Width – 1830mm (72″)
Overall Width – 2045mm (81″)
Overall Length – 1095mm (43″)
Cut Height Range – 12-102mm (1/2″ – 4″)
Approx Weight – 250kg
Hydraulic Drive – N/A
Warranty – 3 Years

Description

Trimax Pegasus S5: The Gold Standard in Wide-Area Mowing for Parks, Airports, Sports Fields & More. Since 2001, the Trimax Pegasus has set the standard in wide-area mowing for parks, reserves, airports, racecourses, sports fields, and turf farms. With the introduction of the new Trimax Pegasus S5, Trimax raises the bar once again. Built to be stronger, smarter, and safer, the Pegasus S5 is engineered to outperform. For over 20 years, the Pegasus has led the industry, originally debuting as the world’s first multi-deck roller mower. Known for its rugged design and versatility, the Pegasus series offers fast spindle speeds and deep mowing decks for a high-quality, consistent cut across a wide range of surfaces. With its articulating decks, the Pegasus provides an even cut on light to moderate contours, ensuring a pristine finish every time. The Trimax Pegasus S5 further enhances the strength, durability, and efficiency that Trimax is known for, designed to extend machine life and minimize downtime—ideal for demanding, full-time commercial mowing.

Features

3 Year Warranty

• We build mowers that last and they’re supported with a 3 year industry leading warranty.

Low Maintenance

• With zero daily maintenance required, we’ve reduced grease points by 50% and annual grease consumption by 80%.

LazerBladez™

• Achieves a superior cut and finish and are more cost efficient than cylinder reels or solid blade beams.

Full Width Rollers

• Full width front and rear rollers follow contours and provide excellent anti-scalp protection.

Auto Belt Tensioning

• Improves drive to the spindles without requiring manual belt adjustments.

Wheels Run On Cut Grass

• The rear deck is located between the transport wheels so grass is not flattened prior to mowing.

Belt Cavity Dual Wash Flaps

• Provides easy access for removal of grass and drainage of water from belt cavities.

In-Cab Unlock System

• Unlock the mower side decks’ transport lock from the convenience of the tractor seat using a release rope.

Product Options

Nexablades

• Scientifically designed for high-end turf giving a superior cut and spread when it matters most.

Quattro Blade System

• This system adds 2 more blades to each spindle (2 flat & 2 upturned) for a finer cut on warm season grasses.

Storage Box

• The Storage Box can be mounted to the mower with the Lighting Kit with Storage Bracket for easy access to spare parts and tools in the field.

Roller Scrapers

• Trimax Helical Scrapers operate with reduced tension but apply a constant pressure across the roller to assist with the cleaning of debris.

Electric Brakes With Breakaway

• Electric Brakes reduce the braking force needed from the tractor and include an adjustable brake controller with a proportional boost for improved performance. Included is a breakaway system to comply with registration requirements.

Anti-Bounce Skids

• Ideal for high speed mowing, Anti-Bounce Skids reduce the ‘scalping’ effect when mowing on uneven turf. Helps to ease the mower over humps between the front and rear rollers. (Currently unavailable on the ProCut 210 model).

Galvanised

• Hot-Dip Galvanizing provides added protection against corrosion. This is especially useful in coastal environments with high salt concentrations and applications with high fertilizer usage.

Turf Tyres

• Trimax turf tyres help distribute the weight of the mower for less ground disturbance. Recommended for turf/sod farms or fine turf applications. A mudguard option for turf tyres is also available.

Electric Unlock

• Replaces the standard in-cab transport lock release rope with an electric actuator. This is operated by a push-button remote.

Road Kit

• Includes strobe beacons, slow-moving vehicle triangle, license plate mount and light, safety chains, and high visibility lights for the side and rear of the mower.

Spare Road Tyre & Mount

• An easy and convenient mounting kit for attaching a spare road tyre to the mower. Spare tyres (road and turf tyres) without mounting kits are also available.

Trimax Connect

• A free app available for Trimax Multi-Lift System customers. Allows bluetooth mower connection to track mow hours, manage key service activity or control MLS functionality.

Multi-Lift System

• The MultiLIFT System (MLS) is a combination of QuikLIFT and IndividualLIFT with the additional benefit of BiLIFT (rear deck-only mowing) for narrow gateways and driveways. Fitted with Drive Protect and timed blade spin-down for machinery protection and bystander safety.

Models

Pegasus S5 493 Pegasus S5 610 Pegasus S5 722

Specifications

Pegasus S5 493 Cutting Width – 4.94m (194”) Overall Width – 5.1m (200”) Width (Transport Mode) – 2.53m (99”) Overall Length – 4.65m (183”) Cut Height Range – 10-110mm (3/8″ – 4 1/3″) No. of Blade Spindles – 9 Approx Weight – 2200kg Minimum PTO Output* – 50hp Transport Height – 2.62m (103”) Warranty (Years) – 3 Workrate (6 mph) – 2.96 hectares/hr *Minimum PTO output is a guide only. Requirement varies with the type of work and the terrain. Pegasus S5 610 Cutting Width – 6.09m (240”) Overall Width – 6.25m (246”) Width (Transport Mode) – 2.53m (99”) Overall Length – 4.65m (183”) Cut Height Range – 10-110mm (3/8″ – 4 1/3″) No. of Blade Spindles – 11 Approx Weight – 2440kg Minimum PTO Output* – 55hp Transport Height – 3.2m (126”) Warranty (Years) – 3 Workrate (6 mph) – 3.64 hectares/hr *Minimum PTO output is a guide only. Requirement varies with the type of work and the terrain. Pegasus S5 722 Cutting Width – 7.23m (285”) Overall Width – 7.39m (291”) Width (Transport Mode) – 2.53m (99”) Overall Length – 4.65m (183”) Cut Height Range – 10-110mm (3/8″ – 4 1/3″) No. of Blade Spindles – 13 Approx Weight – 2660kg Minimum PTO Output* – 60hp Transport Height – 3.8m (150”) Warranty (Years) – 3 Workrate (6 mph) – 4.34 hectares/hr *Minimum PTO output is a guide only. Requirement varies with the type of work and the terrain.

Description

The Trimax Stealth S3 SR elevates the best features of the renowned Stealth Series 3, specially optimising them for long grass applications. Designed to tackle grass heights up to 500 mm while still delivering a superior, precise cut, the Stealth SR is an excellent alternative to traditional gear-driven wing mowers, particularly for large areas with extended cutting cycles. At Trimax, we listened to customer feedback, developing the Stealth SR to meet demand for high-quality cutting even in tougher, long-grass conditions. With nearly 40 years of expertise in mower innovation and durability, we’ve engineered the Stealth S3 SR as the ideal solution for efficient open-space and long-grass management. Trimax mowers are built to perform and endure, and the Stealth S3 SR is no exception. Backed by our industry-leading 3-year factory warranty, the longest available, Trimax also offers a reliable local parts supply and responsive technical support to keep you mowing even in the toughest environments. Choose the Trimax Stealth S3 SR – the robust solution for your long grass mowing needs.

Features

Long Grass Performance

• Designed to mow grass up to 500 mm high and achieve the quality cut you expect from Trimax.

Anti-Scalp Roller

• A raised front roller provides anti-scalp protection for your turf without impacting long grass performance.

In-Cab Unlock System

• Unlock the mower wings’ transport lock from the convenience of the tractor seat using the tractor’s hydraulic control lever.

Easy Height Adjustment

• Clearly displayed stainless steel height indicators allow for the easy adjustment of cut heights without having to raise or lower the wings.

Stand On Covers

• Provides safe and easy access to the rear of the tractor when coupling the mower.

Loctek Roller Bearing Retention System

• A stubless roller retention system for vastly improved alignment, bearing life and replacement ease.

Easy To Clean

• The improved belt chamber design and front openings allow grass to easily be washed or blown out.

Low Maintenance

• Zero daily maintenance. Spindles, roller bearings and auto-belt tensioning are maintenance-free.

LazerBladez™

• Achieves a superior cut and finish and are more cost efficient than cylinder reels or solid blade beams.

3 Year Warranty

• We aim to build mowers that last and we back this up with a 3 year warranty which also includes the spindles and gearboxes. Our robust design coupled with our experienced service and support network ensures minimum downtime and more productivity.

Product Options

Roller Scrapers

• Trimax Helical Scrapers operate with reduced tension but apply a constant pressure across the roller to assist with the cleaning of debris.

Hydraulic Unlock

• Switch from electric actuation to hydraulic actuation of the mower wings’ transport lock. This is operated using the tractor’s hydraulic lever.

Individual Wing Lift

• Individual wing lift allows independent lift of either side deck for reduced cutting in confined spaces.

Lighting Kit With Storage Bracket

• The Lighting Kit with Storage Bracket mounts LED road lights and a safety triangle to the mower for commercial use. It also mounts a bracket for holding a storage box (sold separately).

Galvanized

• Hot-Dip Galvanizing provides added protection against corrosion. This is especially useful in coastal environments with high salt concentrations and applications with high fertilizer usage.

Service Stands

• Designed with safety in mind, the Stealth Series 3 can come with lockable service stands which hold the mower up to assist with maintenance.

Models

Stealth S3 SR

Specifications

Stealth S3 SR Cutting Width – 3.4m (134”) Overall Width – 3.55m (140”) Overall Length –1.63m (64”) Width (Transport Mode) – 2.42m (95”) Height (Transport Mode) – 1.21m (3′ 11 1/2″) Cut Height Range – 40 – 90mm (1 1/2″ – 3 1/2″) No. of Blade Spindles – 5 Approx Weight – 900kg (1984lbs) Minimum PTO Output* – 60hp Warranty (Years) – 3 Workrate (6 kph) – 1.04 hectares/hr *Minimum PTO output is a guide only. Requirement varies with the type of work and the terrain.

Description

The Trimax Stealth S3 has been designed to have a higher quality of cut, operate in a wider range of conditions, be safer, more robust, easier to operate and take less time to maintain than any previous Stealth. Backed by 30 years experience in the Australian market, the concept of Stealth S3 was born from the demand of our Australian customers for a mower that was more versatile in terms of long grass performance and is more user friendly for both the operator and the workshop. Backed by three year warranty and Australian based parts and technical support, we believe the Trimax Stealth S3 to be the best linkage wing mower for passive and active turf in the market.

Features

3 Year Factory Backed Warranty

• We build mowers that last. Our market leading 3 year warranty proves we stand behind our products and you can have confidence in your purchase decision.

Loctek Roller Bearing Retention System

• A stubless roller retention system for vastly improved alignment, bearing life and replacement ease.

In-Cab Unlock System

• Unlock the mower wings’ transport lock from the convenience of the tractor seat using the tractor’s hydraulic control lever.

Reduced Maintenance

• We’ve eliminated the need to grease pivot points and significantly reduced spindle maintenance. You can spend more time mowing and less time maintaining!

Stand-On Covers

• Provides safe and easy access to the rear of the tractor when coupling the mower.

Easy To Clean

• The improved belt chamber design results in easy cleaning, with the front openings allowing the grass to be easily washed or blown out.

Anti-Wear Skids

• Anti-wear skids reduce wear on side channels when operating in rough or uneven terrain.

Most Versatile Stealth

• Refined cutting chamber and baffle design for improved cut quality and spread in all conditions.

Easy, Accurate Height Adjustment

• Clearly displayed stainless steel height indicators allow for the easy adjustment of cut heights without having to raise or lower the wings.

LazerBladez™

• The Trimax Stealth S3 is fitted with Trimax LazerBladez™, a blade system with a carefully engineered centre of gravity and distinctive tilt-forward blade design unique to Trimax. For optimum performance and grass spread.

Product Options

Roller Scrapers

• Trimax Helical Scrapers operate with reduced tension but apply a constant pressure across the roller to assist with the cleaning of debris.

Service Stands

• Designed with safety in mind, the Stealth Series 3 can come with lockable service stands which hold the mower up to assist with maintenance.

Quatro Blade System

• This system adds 2 more blades to each spindle (2 flat & 2 upturned) for a finer cut on warm season grasses.

Storage Box

• The Storage Box can be mounted to the mower with the Lighting Kit with Storage Bracket for easy access to spare parts and tools in the field.

Lighting Kit with Storage Bracket

• The Lighting Kit with Storage Bracket mounts LED road lights and a safety triangle to the mower for commercial use. It also mounts a bracket for holding a storage box (sold separately).

Hydraulic Unlock

• Switch from electric actuation to hydraulic actuation of the mower wings’ transport lock. This is operated using the tractor’s hydraulic lever.

Individual Wing Lift

• Individual wing lift allows independent lift of either side deck for reduced cutting in confined spaces.

Galvanised

• Hot-Dip Galvanizing provides added protection against corrosion. This is especially useful in coastal environments with high salt concentrations and applications with high fertilizer usage.

Specifications

Stealth S3 Cutting Width – 3.4m (134″) Overall Width – 3.55m (140″) Overall Length – 1.62m (63″) Width (Transport Mode) – 2.42m (95″) Height (Transport Mode) – 1.21m (47″) Cut Height Range – 10-90mm (3/8″ – 3 1/2″) No. of Blade Spindles – 5 Workrate (6 kph) – 2.04 hectares/hr Approx Weight – 940kg (2070lbs) Minimum PTO Output* – 70hp Warranty (Years) – 3 *Minimum PTO output is a guide only. Requirement varies with the type of work and the terrain.

Description

The Trimax Snake Series 2 – Building on Greatness The Trimax Snake S2 represents over 35 years of innovation, expert engineering, and valuable customer feedback. Renowned for its precision and performance, the Trimax Snake is trusted by some of the world’s most prestigious golf courses to deliver a flawless cut and superior results. Designed for excellence, the Trimax Snake S2 sets the standard in turf management. Experience the perfect combination of cutting-edge technology and proven reliability. The Trimax Snake S2 is the perfect mower for compact tractors, designed specifically for sports turf and golf courses. Combining world-class cutting quality with unmatched articulation capabilities, the Snake S2 delivers results never before seen on a Trimax mower. Tested by the Sports Turf Institute of New Zealand, the Trimax Snake’s cutting system offers the precision of a cylinder mower while maintaining the versatility and reliability of our renowned rotary design. The Snake Series 2 now includes enhanced features such as the Trimax LocTEK Roller Retention System, reducing maintenance for easier upkeep. Available in 3.2m and 4m cutting widths, this mower is backed by an industry-leading 3-year warranty. Built for agility and durability, the Trimax Snake S2 is a top choice for professionals. Available now at KC Equipment for golf courses, sports fields, and professional turf applications.

Features

Articulation Ability

• With three articulating decks the Snake has the ability to follow contours with minimal scalping.

Zero Turn

• Continuous cutting while turning for areas such as headlands, tight spaces and around trees.

LocTEK Stubless Roller Retention System

• For vastly improved roller retention, alignment, bearing life and minimal maintenance.

QuickLift Temporary Deck Lift

• Enables all three mower decks to be raised just off the ground without disengaging the PTO. This improves productivity by allowing the mower to traverse gravel driveways, paths or kerbs.

Full Width 5mm Heavy Duty Rollers Rollers

• Minimise scalping in extreme undulating conditions and mow over kerbs, bunkers and potholes without blade strike.

Automatic Belt Tensioners

• Eliminate the need for belt adjustments and improve drive to the spindles and blades.

LazerBladez™

• Snake is fitted with Trimax LazerBladez™, a blade system with a carefully engineered centre of gravity and distinctive tilt-forward blade design unique to Trimax. Utilising the LazerBladez™ full length cutting edge, Snake produces a clean finish even when mowing at high ground speeds. LazerBladez™ are made with high grade alloy steel providing a significant increase in blade and bolt life for added safety and lower operating costs.

Easy Height Adjustment

• Clearly displayed stainless steel height indicators allow the easy adjustment of cut heights without having to raise or lower the wings.

Low Maintenance

• SteadFast™ Sealed Spindles have eliminated the tedious task of regular greasing. Snake now also features maintenance-free pivot bushes.

In-Cab Unlock System

• Unlock the mower wings’ transport lock from the convenience of the tractor seat using a release rope.

3 Year Warranty

• We aim to build mowers that last and we back this up by a 3 year warranty which also includes the spindles and gearboxes. Our robust design, coupled with our experienced service and support network ensure minimum downtime and more productivity.

Product Options

Nexablades

• Scientifically designed for high-end turf giving a superior cut and spread when it matters most.

Electric Unlock

• Replaces the standard in-cab transport lock release rope with an electric actuator. This is operated by a push-button remote.

Mudguards, Lights and Chains

• Add LED tail light clusters, safety chains, and transport wheel mudguards for road transportation.

Roller Scrapers

• Trimax Helical Scrapers operate with reduced tension but apply a constant pressure across the roller to assist with the cleaning of debris.

Anti-Bounce Skids

• Ideal for high speed mowing, Anti-Bounce Skids reduce the ‘scalping’ effect when mowing on uneven turf. Helps to ease the mower over humps between the front and rear rollers. (Currently unavailable on the ProCut 210 model).

Road Rated Tyre

• Add a road-rated tyre for the ability to tow at speeds greater than 40 kph on the road.

Multi-Lift System

• The MultiLIFT System (MLS) is a combination of QuikLIFT and IndividualLIFT with the additional benefit of BiLIFT (rear deck-only mowing) for narrow gateways and driveways. Fitted with Drive Protect and timed blade spin-down for machinery protection and bystander safety.

Trimax Connect

• A free app available for Trimax Multi-Lift System customers. Allows bluetooth mower connection to track mow hours, manage key service activity or control MLS functionality.Trimax Helical Scrapers operate with reduced tension but apply a constant pressure across the roller to assist with the cleaning of debris.

Mulch Kit

• Save on purchasing dedicated leaf-blowing and collection units with the Snake Mulch Kit. Retrofittable to existing Snake S1 & S2 models.

Testimonials

Damien Curtis – The Kings School, Parramatta NSW: “I wanted an efficient mower that was also cost-effective and able to give a really good quality cut. The machine is really easy for our guys to maintain and that helps when we don’t have a full-time mechanic.” Cory Phillipos – Equipment Manager, Golf Club Of Georgia “The Snake mowers are above and beyond when it comes to quality of cut. The cut quality is in fact better than the self contained mowers we demo’d. We really put it through some rough stuff here, and it preforms well.” Brian Buckner – Superintedent, Golf Club Of Houston “It was obvious pretty quick that with the Snake we could not only save a lot of labor but provide a better quality of cut. It’s is so versatile, we can use it to mow rough and we can use it to mow fairways.”

Models

Snake S2 320 Snake S2 400

Specifications

Snake S2 320 Cutting Width – 3.23m (10′ 7″) Overall Width – 3.37m (11′ 1″) Overall Length – 3.5m (11′ 6″) Transport Width – 2.1m (6′ 10 1/2″) Transport Height – 1.82m (5′ 11 1/2″) Cut Height Range – 10-100mm (3/8″ – 4″) No. Of Blade Spindles – 9 Approx. Weight – 1250kg (2756lbs) Minimum PTO Output* – 35hp Workrate (6 mph) – 7 acres/hr Warranty (Years) – 3 * Minimum PTO output is a guide only. Requirement varies with the type of work and the terrain. Snake S2 400 Cutting Width – 3.99m (13′ 1″) Overall Width – 4.11m (13′ 6″) Overall Length – 3.5m (11′ 6″) Transport Width – 2.14m (7′ 1/4″) Transport Height – 2.21m (7′ 3 1/2″) Cut Height Range – 10-100mm (3/8″ – 4″) No. Of Blade Spindles – 11 Approx. Weight – 1390kg (3064lbs) Minimum PTO Output* – 45hp Workrate (6 mph) – 7 acres/hr Warranty (Years) – 3 * Minimum PTO output is a guide only. Requirement varies with the type of work and the terrain.

Description

Introducing the Single Roller Trimax ProCut S5 SR, the ultimate long grass mower designed for exceptional performance and a superior cut. Engineered with a low-profile body and enhanced under-deck clearance, this mower ensures optimal clipping distribution while eliminating the need for daily maintenance. Thanks to the innovative Titan Roller Bearings, all daily greasing is a thing of the past, making mower upkeep easier than ever. The advanced auto-belt tensioning system not only minimizes belt maintenance but also delivers improved drive to the spindles, resulting in a cleaner, more powerful cut every time. Upgrade your mowing experience with the Trimax ProCut S5 SR—market-leading performance, minimal maintenance, and a flawless finish. Perfect for professional and large-scale applications. Available at KC Equipment!

Features

Accurate Spindle Setting Technology

• Spindle height is perfectly aligned providing the most accurate cut possible.

Titan Roller Bearing System

• The Trimax Titan roller bearing system is maintenance-free, requiring no regular greasing, and provides excellent retention.

Belt Cavity Dual Wash Flaps

• Provides easy access for removal of grass and drainage of water from belt cavity.

Precise Height Adjustment

• Clearly displayed indicators in both metric and imperial units and a high-tensile 1/16″ pitch adjuster for precise cut height alterations.

Stand On Covers

• Provides safe and easy access to the rear of the tractor when coupling the mower.

Steadfast Spindles

• With no spindle greasing required maintenance is extremely low and productivity enhanced.

Full-Width Rollers

• Full-width front and rear rollers follow contours and provide excellent anti-scalp protection.

Low Maintenance

• Zero daily maintenance. Spindles, roller bearings and auto-belt tensioning are maintenance-free.

LazerBladez™

• Achieves a superior cut and finish and is more cost-efficient than reels or solid blade beams.

3 Year Warranty

• We aim to build mowers that last and we back this up with a 3 year warranty which also includes the spindles and gearboxes. Our robust design coupled with our experienced service and support network ensures minimum downtime and more productivity.

Product Options

Storage & Lighting Kit

• LED road lights, safety triangle, and bracket for storage box.

Galvanized

• Protect against corrosion in harsh environments.

Roller Scrapers

• Cleans rollers and reduces clumping in wet conditions.

Storage Box

• Easy access to spare parts and tools.

On-Call Kit

• Each kit contains bearings blades and belts for a quick replacement in the field.

Models

ProCut/S5 SR 178 ProCut/S5 SR 210 ProCut/S5 SR 237 ProCut/S5 SR 290

Specifications

ProCut/S5 SR 178 Cutting Width – 1.74m (5’ 8 ½”) Overall Width – 1.91m (6’ 3”) Overall Length –1.36m (4’ 5”) Height – 1.08m (3’ 6 ½”) Cut Height Range – 10-110mm (⅜” – 4 ⅓”) No. of Blade Spindles – 3 Approx Weight – 462kg (1019lbs) Minimum PTO Output* – 35hp Warranty (Years) – 3 Workrate (6 kph) – 1.04 hectares/hr *Minimum PTO output is a guide only. Requirement varies with the type of work and the terrain. ProCut/S5 SR 210 Cutting Width – 2.06m (6′ 9″) Overall Width – 2.22m (7′ 3 ½”) Overall Length – 1.43m (4’ 8”) Height – 1.08m (3’ 6 ½”) Cut Height Range – 10-110mm (⅜” – 4 ¹⁄₃”) No. of Blade Spindles – 3 Approx Weight – 509kg (1122lbs) Minimum PTO Output* – 40hp Warranty (Years) – 3 Workrate (6 kph) – 1.24 hectares/hr *Minimum PTO output is a guide only. Requirement varies with the type of work and the terrain. ProCut/S5 SR 237 Cutting Width – 2.32m (7’ 7”) Overall Width – 2.48m (8’ 1 ½”) Overall Length – 1.36m (4’ 5”) Height – 1.08m (3’ 6 ½”) Cut Height Range – 10-110 mm (³⁄₈” – 4 ¹⁄₃”) No. of Blade Spindles – 4 Approx Weight – 568kg (1252lbs) Minimum PTO Output* – 45hp Warranty (Years) – 3 Workrate (6 kph) – 1.39 hectares/hr *Minimum PTO output is a guide only. Requirement varies with the type of work and the terrain. ProCut/S5 SR 290 Cutting Width – 2.89m (9’ 6”) Overall Width – 3.05m (10’ ½”) Overall Length – 1.36m (4’ 5”) Height – 1.08m (3’ 6 ½”) Cut Height Range – 10 – 110mm (³⁄₈” – 4 ¹⁄₃”) No. of Blade Spindles – 5 Approx Weight – 663kg (1462lbs) Minimum PTO Output* – 55hp Warranty (Years) – 3 Workrate (6 kph) – 1.73 hectares/hr *Minimum PTO output is a guide only. Requirement varies with the type of work and the terrain.

Description

The Trimax ProCut S5 FM is a robust machine engineered to withstand everyday use in the toughest commercial environments, yet will deliver a reel-like cut – every time. In operation, the front-mounted version of the ProCut Series 5 rides on the ground on its front wheels and rear roller. The castoring front wheels allow easy manoeuvring, and combines with the rear roller to follow ground contours and prevent scalping. With the mower in front the operator has no need to look behind, and the tractor wheels do not flatten the uncut grass. Moreover, maintaining your mower has never been easier with all daily greasing requirements being removed with the implementation of the new Titan Roller Bearings. The new auto-belt tensioning system reduces belt maintenance and improves drive to the spindles for a cleaner, stronger cut. Talk to us today about the capabilities of the ProCut S5 FM in your environment.

Features

Stand On Covers

• Provides safe and easy access to the rear of the tractor when coupling the mower.

Steadfast Spindles

• With no spindle greasing required maintenance is extremely low and productivity enhanced.

Low Maintenance

• Zero daily maintenance. Spindles, roller bearings and auto-belt tensioning are maintenance-free.

Full Width Rollers

• Full-width front and rear rollers follow contours and provide excellent anti-scalp protection.

LazerBladez™

• Achieves a superior cut and finish and is more cost-efficient than reels or solid blade beams.

3 Year Warranty

• We aim to build mowers that last and we back this up with a 3 year warranty which also includes the spindles and gearboxes. Our robust design coupled with our experienced service and support network ensures minimum downtime and more productivity.

Product Options

Quattro Blade System

• Four blades (flat, upturned or mixed) per spindle for a finer cut.

Nexablades

• Scientifically designed for high-end turf giving a superior cut and spread when it matters most.

Roller Scrapers

• Cleans rollers and reduces clumping in wet conditions.

Rear Mount

• Available in rear three-point linkage configuration with front and rear rollers for unmatched safety.

On-Call Kit

• Each kit contains bearings blades and belts for a quick replacement in the field.

Models

ProCut FM/S5 178 ProCut FM/S5 210 ProCut FM/S5 237 ProCut FM/S5 290

Specifications

ProCut FM/S5 178 Cutting Width – 1.74m (5’ 8 ½”) Overall Width – 1.91m (6’ 3”) Overall Length – 1.65m (5’ 5”) Height – 1.08m (3’ 6 ½”) Cut Height Range – 10-110mm (⅜” – 4 ⅓”) No. of Blade Spindles – 3 Approx Weight – 569kg (1254lbs) Minimum PTO Output* – 35hp Warranty (Years) – 3 *Minimum PTO output is a guide only. Requirement varies with the type of work and the terrain. ProCut FM/S5 210 Cutting Width – 2.06m (6′ 9″) Overall Width – 2.22m (7′ 3 ½”) Overall Length – 1.72m (5′ 8″) Height – 1.08m (3’ 6 ½”) Cut Height Range – 10-110mm (⅜” – 4 ¹⁄₃”) No. of Blade Spindles – 3 Approx Weight – 616kg (1358lbs) Minimum PTO Output* – 40hp Warranty (Years) – 3 *Minimum PTO output is a guide only. Requirement varies with the type of work and the terrain. ProCut FM/S5 237 Cutting Width – 2.32m (7’ 7”) Overall Width – 2.48m (8’ 1 ½”) Overall Length – 1.65m (5’ 5”) Height – 1.08m (3’ 6 ½”) Cut Height Range – 10-110mm (⅜” – 4 ¹⁄₃”) No. of Blade Spindles – 4 Approx Weight – 675kg (1488lbs) Minimum PTO Output* – 45hp Warranty (Years) – 3 *Minimum PTO output is a guide only. Requirement varies with the type of work and the terrain. ProCut FM/S5 290 Cutting Width – 2.89m (9’ 6”) Overall Width – 3.05m (10’ ½”) Overall Length – 1.65m (5’ ½”) Height – 1.08m (3’ 6 ½”) Cut Height Range – 10-110mm (⅜” – 4 ¹⁄₃”) No. of Blade Spindles – 5 Approx Weight – 770kg (1697lbs) Minimum PTO Output* – 55hp Warranty (Years) – 3 *Minimum PTO output is a guide only. Requirement varies with the type of work and the terrain.

Description

The Trimax ProCut has been a trusted name in commercial mowing for over 30 years, delivering superior performance across parks, reserves, school grounds, sports fields, and golf courses worldwide. From prestigious locations like Windsor Castle to your local sports fields, the ProCut has set the standard for reliability and quality. Now, with the release of the ProCut Series 5 in 2023, this renowned mower has been further refined to offer unmatched excellence. The ProCut S5 maintains the market-leading cut and spread quality of its predecessors while eliminating the need for daily maintenance. It’s the ideal solution for a wide range of commercial mowing environments. The ProCut Series 5 is designed for hassle-free operation. With the introduction of advanced Titan Roller Bearings, all daily greasing requirements have been removed, reducing your maintenance time. The innovative auto-belt tensioning system also reduces belt upkeep while enhancing drive to the spindles, ensuring a cleaner, more consistent cut in all conditions. For commercial mowing that combines superior performance with easy maintenance, the ProCut Series 5 is the perfect choice. Contact KC Equipment today to learn how this innovative mower can elevate your mowing operations.

Features

Accurate Spindle Setting Technology

• Spindle height is perfectly aligned providing the most accurate cut possible.

Titan Roller Bearing System

• The Trimax Titan roller bearing system is maintenance-free, requiring no regular greasing, and provides excellent retention.

Belt Cavity Dual Wash Flaps

• Provides easy access for removal of grass and drainage of water from belt cavity.

Precise Height Adjustment

• Clearly displayed indicators in both metric and imperial units and high-tensile 1/16″ pitch adjuster for precise cut height alterations.

LazerBladez™

• Achieves a superior cut and finish and is more cost-efficient than reels or solid blade beams.

Full-width Rollers

• Full-width front and rear rollers follow contours and provide excellent anti-scalp protection.

Low Maintenance

• Zero daily maintenance. Spindles, roller bearings and auto-belt tensioning are maintenance-free.

3 Year Warranty

• We aim to build mowers that last and we back this up with a 3 year warranty which also includes the spindles and gearboxes. Our robust design coupled with our experienced service and support network ensures minimum downtime and more productivity.

Product Options

Quattro Blade System

• Four blades (flat, upturned or mixed) per spindle for a finer cut.

Front Mount

• Convenient visibility. Only for tractors with front PTO drive.

Roller Scrapers

• Cleans rollers and reduces clumping in wet conditions.

Anti-Bounce Skids

• Eliminates scalping and bouncing and reduces side channel wear.

Galvanised

• Protect against corrosion in harsh environments.

Storage & Lighting Kit

• LED road lights, safety triangle, and bracket for storage box.

Single Roller

• Allows greater grass intake at the front of the mower.

Nexablades

• Scientifically designed for high-end turf giving a superior cut and spread when it matters most.

Storage Box

• Easy access to spare parts and tools.

Models

ProCut/S5 178 ProCut/S5 210 ProCut/S5 237 ProCut/S5 290

Specifications

ProCut/S5 178 Cutting Width – 1.74m (5’ 8 ½”) Overall Width – 1.89m (6’ 2 ½”) Overall Length – 1.44m (4’ 9”) Height – 1.08m (3’ 6 ½”) Cut Height Range – 10-110mm (⅜” – 4 ¹⁄₃”) No. of Blade Spindles – 3 Approx Weight – 492kg (1085lbs) Minimum PTO Output* – 35hp Warranty (Years) – 3 Workrate (6 kph) – 1.04 hectares/hr *Minimum PTO output is a guide only. Requirement varies with the type of work and the terrain. ProCut/S5 210 Cutting Width – 2.06m (6’ 9”) Overall Width – 2.21m (7’ 3”) Overall Length – 1.51m (4’ 11 ½”) Height – 1.08m (3’ 6 ½”) Cut Height Range – 10-110mm (⅜” – 4 ¹⁄₃”) No. of Blade Spindles – 3 Approx Weight – 543kg (1197lbs) Minimum PTO Output* – 40hp Warranty (Years) – 3 Workrate (6 kph) – 1.24 hectares/hr *Minimum PTO output is a guide only. Requirement varies with the type of work and the terrain. ProCut/S5 237 Cutting Width – 2.32m (7’ 7”) Overall Width – 2.47m (8’ 1”) Overall Length – 1.44m (4’ 9”) Height – 1.08m (3’ 6 ½”) Cut Height Range – 10-110mm (⅜” – 4 ¹⁄₃”) No. of Blade Spindles – 4 Approx Weight – 605kg (1334lbs) Minimum PTO Output* – 45hp Warranty (Years) – 3 Workrate (6 kph) – 1.39 hectares/hr *Minimum PTO output is a guide only. Requirement varies with the type of work and the terrain. ProCut/S5 290 Cutting Width – 2.89m (9’ 6”) Overall Width – 3.04m (10’) Overall Length – 1.44m (4’ 9”) Height – 1.08m (3’ 6 ½”) Cut Height Range – 10-110mm (⅜” – 4 ¹⁄₃”) No. of Blade Spindles – 5 Approx Weight – 707kg (1559lbs) Minimum PTO Output* – 55hp Warranty (Years) – 3 Workrate (6 kph) – 1.73 hectares/hr *Minimum PTO output is a guide only. Requirement varies with the type of work and the terrain.

Description

Trimax Striker is a multi-spindled rotary mower with low maintenance requirements that incorporates a unique baffle design for improved grass distribution and less clumping. Designed for tractors in the 25-45hp range, Striker has Trimax LazerBladez™ fitted as standard and has full width front and rear rollers which produce an attractive striped pattern and guard against scalping. Striker is designed to withstand tough conditions. It has variable height adjustment for year-round mowing and an enclosed cutting chamber for added safety. Able to mow quickly at a high standard, Striker is ideal for educational and sports facilities and green spaces where presentation is key. Ask us how Striker can transform your environment.

Features

3 Year Warranty

• We aim to build mowers that last and we back this up with a 3 year warranty which also includes the spindles and gearboxes. Our robust design coupled with our experienced service and support network ensures minimum downtime and more productivity.

Low Maintenance

• With only 4 carefully positioned grease points and robust spindles with sealed ball bearings the Trimax Striker has incredibly low maintenance requirements.

Safety

• Striker exceeds international safety standards and is backed up by our meticulous testing and support network. Striker is a mower that can be used with confidence even when mowing in confined areas.

LazerBladez™

• LazerBladez™ are fitted to enhance the clean cutting ability of the Striker. The tilt-forward design of LazerBladez™, which is unique to Trimax, minimises hang back in tough conditions and the full-length cutting ensures that a clean cut is achieved when mowing at high ground speeds. LazerBladez™ are made from a special alloy steel which provides greater durability, needed in commercial mowing operations. The combination of more cuts per metre, LazerBladez™ and a unique under-body design ensures an even spread of clippings.

Advanced Design

• Striker incorporates decades of experience with multi-spindled rotary roller mowers. Lighter than other Trimax mowers, it retains the attention to detail that minimises downtime and makes servicing easy. The cutting system, body integrity and sealed ball bearing spindles have been proven with extensive and rigorous testing.

Compact Tractor Suitable

• Able to be paired with tractors as low as 25hp.

Striping Capable

• Full width front and rear rollers produce beautiful striping.

Product Options

Roller Scrapers

• Cleans rollers and reduces clumping in wet conditions.

Nexablades

• Scientifically designed for high-end turf giving a superior cut and spread when it matters most.

Models

Striker 150 Striker 190

Specifications

Striker 150 Cutting Width – 1.46m (4′ 9 1/2″) Overall Width – 1.56m (5′ 1 1/2″) Overall Length – 1.16m (3′ 9 1/2″) Cut Height Range – 10 – 100mm (3/8″ – 4″) Height – 0.83m (2′ 8 1/2″) Workrate (6 mph) – 3 acres/hr No. of Blade Spindles – 3 Approx Weight – 322kg (710lbs) Minimum PTO Output* – 25 hp *Minimum PTO output is a guide only. Requirement varies with the type of work and the terrain. Striker 190 Cutting Width – 1.94m (6′ 4 1/2″) Overall Width – 2.04m (6′ 8 1/2″) Overall Length – 1.16m (3′ 9 1/2″) Cut Height Range – 10 – 100mm (3/8″ – 4″) Height – 0.83m (2′ 8 1/2″) Workrate (6 mph) – 4 acres/hr No. of Blade Spindles – 4 Approx Weight – 400kg (882lbs) Minimum PTO Output* – 30 hp *Minimum PTO output is a guide only. Requirement varies with the type of work and the terrain.

Description

Wheel kits to suit 5ft & 6ft Southern Cross Ag Machinery Slashers. One kit recommended for 5ft Slashers and two kits for 6ft Slashers Need more information? Our knowledgeable team is always available to assist. Contact your local KC Equipment branch today for expert advice and guidance.

Additional Information:

All prices include GST. Freight charges are extra. For sales or more information, contact your local KC Equipment branch today! Please note: Product images are for illustration purposes only. Actual products may vary. Prices are accurate at the time of posting but are subject to change.

Model

SXMSLAWHEELKIT

Specifications

Make – Southern Cross Ag Machinery

Description

This 6ft 100hp galvanised slasher is part of the Southern Cross Ag Machinery Slashers, which are expertly designed to handle Australia’s harsh conditions. Southern Cross Ag Machinery Slashers are the perfect solution for land management. Certified to meet Australian Standards, these durable slashers come with a 3-Year Gearbox Warranty, giving you peace of mind with every purchase. Featuring high-quality components, including a gearbox, slip clutch, and PTO shaft from trusted brand Bare-Co, you can trust Southern Cross Ag Machinery Slashers for reliable performance. These versatile slashers are ideal for clearing vegetation such as grass, weeds, scrub, brush, and saplings, providing an eco-friendly method of natural weed control and reducing the need for excessive chemical use. Need help finding the right Southern Cross Ag Machinery Slasher for your needs? Our knowledgeable team is always available to assist. Contact your local KC Equipment branch today for expert advice and guidance.

Application

General purpose slashing

Features

• Australian Slasher Health and Safety Standards Compliant
• Hot dipped galvanised body
• 5mm deck
• Height adjustable skids with five different cuttings heights
• Bare-Co 100HP gearbox. Gearbox supplied with oil (85/140 Gear Oil).
• Bare-Co 8 inch slip clutch
• Bare-Co Series 8 PTO shaft
• Front and rear discharge deflectors (chain)
• Centre mount and offset – left and right
• High tensile drag chains mounting system for durability
• Clear decks for easy maintenance
• Double plate gearbox mount
• Structural integrity located under deck with no impact on material flow
• Reinforced A-frame for strength and functionality
• Cutter bar blade carrier system (Bare-Co Blades B6002)
• Optional wheel kits available (two-wheel kits are recommended for the 6ft slasher)
• Spare parts carried in stock
• Bare-Co components are readily available from KC Equipment
• Backed by Southern Cross Ag Machinery After Sales Service and Technical Support via KC Equipment Service and Repairs Department

Additional Information:

All prices include GST. Freight charges are extra. For sales or more information, contact your local KC Equipment branch today! Please note: Product images are for illustration purposes only. Actual products may vary. Prices are accurate at the time of posting but are subject to change.

Model

6SLA100GAL (6ft) Galvanised Slasher

Specifications

Recommended Tractor (HP)- 50-100hp Cutting Width (mm) – 1750mm Overall Width (mm) – 1870mm Cutting Height (mm) – 42-167mm Gross Weight (kg) – 520 KGS Number of Blades – 2 Blade Size (mm) – Bare-Co: B6002 Blade Tip Speed (m/s max.) – 90 Deck Thickness (mm) – 5.0 3-Point Hitch – Category One Gear Box / Capacity – Bare-Co 1:1.93 / 100HP PTO Driveline – Bare-Co 8 inch slip-clutch & series 8 PTO shaft Grass Discharge – Rear Discharge Blade Carrier System – Cutter Bar Optional Wheel Kit(s) – Twin Kit Available Offset – Left and Right

Warranty

3 Year Gearbox Warranty

Description

This 6ft 75hp galvanised slasher is part of the Southern Cross Ag Machinery Slashers, which are expertly designed to handle Australia’s harsh conditions. Southern Cross Ag Machinery Slashers are the perfect solution for land management. Certified to meet Australian Standards, these durable slashers come with a 3-Year Gearbox Warranty, giving you peace of mind with every purchase. Featuring high-quality components, including a gearbox, slip clutch, and PTO shaft from trusted brand Bare-Co, you can trust Southern Cross Ag Machinery Slashers for reliable performance. These versatile slashers are ideal for clearing vegetation such as grass, weeds, scrub, brush, and saplings, providing an eco-friendly method of natural weed control and reducing the need for excessive chemical use. Need help finding the right Southern Cross Ag Machinery Slasher for your needs? Our knowledgeable team is always available to assist. Contact your local KC Equipment branch today for expert advice and guidance.

Application

General purpose slashing

Features

• Australian Slasher Health and Safety Standards Compliant
• Hot dipped galvanised body
• 5mm deck
• Height adjustable skids with five different cuttings heights
• Bare-Co 75HP gearbox. Gearbox supplied with oil (85/140 Gear Oil).
• Bare-Co 8 inch slip clutch
• Bare-Co Series 6 PTO shaft
• Front and rear discharge deflectors (chain)
• Centre mount and offset – left and right
• High tensile drag chains mounting system for durability
• Clear decks for easy maintenance
• Double plate gearbox mount
• Structural integrity located under deck with no impact on material flow
• Reinforced A-frame for strength and functionality
• Cutter bar blade carrier system (Bare-Co Blades B6002)
• Optional wheel kits available (two-wheel kits are recommended for the 6ft slasher)
• Spare parts carried in stock
• Bare-Co components are readily available from KC Equipment
• Backed by Southern Cross Ag Machinery After Sales Service and Technical Support via KC Equipment Service and Repairs Department

Additional Information:

All prices include GST. Freight charges are extra. For sales or more information, contact your local KC Equipment branch today! Please note: Product images are for illustration purposes only. Actual products may vary. Prices are accurate at the time of posting but are subject to change.

Model

6SLA75GAL (6ft) Galvanised Slasher

Specifications

Recommended Tractor (HP)- 50-75hp Cutting Width (mm) – 1750mm Overall Width (mm) – 1870mm Cutting Height (mm) – 42-167mm Gross Weight (kg) – 462 KGS Number of Blades – 2 Blade Size (mm) – Bare-Co: B6002 Blade Tip Speed (m/s max.) – 90 Deck Thickness (mm) – 5.0 3-Point Hitch – Category One Gear Box / Capacity – Bare-Co 1:1.93 / 75HP PTO Driveline – Bare-Co 8 inch slip-clutch & series 6 PTO shaft Grass Discharge – Rear Discharge Blade Carrier System – Cutter Bar Optional Wheel Kit(s) – Twin Kit Available Offset – Left and Right

Warranty

3 Year Gearbox Warranty

Description

This 5ft 75hp galvanised slasher is part of the Southern Cross Ag Machinery Slashers, which are expertly designed to handle Australia’s harsh conditions. Southern Cross Ag Machinery Slashers are the perfect solution for land management. Certified to meet Australian Standards, these durable slashers come with a 3-Year Gearbox Warranty, giving you peace of mind with every purchase. Featuring high-quality components, including a gearbox, slip clutch, and PTO shaft from trusted brand Bare-Co, you can trust Southern Cross Ag Machinery Slashers for reliable performance. These versatile slashers are ideal for clearing vegetation such as grass, weeds, scrub, brush, and saplings, providing an eco-friendly method of natural weed control and reducing the need for excessive chemical use. Need help finding the right Southern Cross Ag Machinery Slasher for your needs? Our knowledgeable team is always available to assist. Contact your local KC Equipment branch today for expert advice and guidance.

Application

General purpose slashing

Features

• Australian Slasher Health and Safety Standards Compliant
• Hot dipped galvanised body
• 4mm deck
• Height adjustable skids with five different cuttings heights
• Bare-Co 75HP gearbox. Gearbox supplied with oil (85/140 Gear Oil).
• Bare-Co 8 inch slip clutch
• Bare-Co Series 6 PTO shaft
• Front and rear discharge deflectors (chain)
• Centre mount and offset – left and right
• High tensile drag chains mounting system for durability
• Clear decks for easy maintenance
• Double plate gearbox mount
• Structural integrity located under deck with no impact on material flow
• Reinforced A-frame for strength and functionality
• Cutter bar blade carrier system (Bare-Co Blades B6002)
• Optional wheel kits available (single wheel kit is recommended for the 5ft slasher)
• Spare parts carried in stock
• Bare-Co components are readily available from KC Equipment
• Backed by Southern Cross Ag Machinery After Sales Service and Technical Support via KC Equipment Service and Repairs Department

Additional Information:

All prices include GST. Freight charges are extra. For sales or more information, contact your local KC Equipment branch today! Please note: Product images are for illustration purposes only. Actual products may vary. Prices are accurate at the time of posting but are subject to change.

Model

5SLA75GAL (5ft) Galvanised Slasher

Specifications

Recommended Tractor (HP)- 35-75hp Cutting Width (mm) – 1470mm Overall Width (mm) – 1650mm Cutting Height (mm) – 42-167mm Gross Weight (kg) – 372 KGS Number of Blades – 2 Blade Size (mm) – 360 x 12.7mm Bare-Co: B6002 Blade Tip Speed (m/s max.) – 80 Deck Thickness (mm) – 4.0 3-Point Hitch – Category One Gear Box / Capacity – Bare-Co 1:1.93 / 75HP PTO Driveline – Bare-Co 8 inch slip-clutch & series 6 PTO shaft Grass Discharge – Rear Discharge Blade Carrier System – Cutter Bar Optional Wheel Kit(s) – Single Kit Available Offset – Left and Right

Warranty

3 Year Gearbox Warranty

Description

This 4ft 45hp galvanised slasher is part of the Southern Cross Ag Machinery Slashers, which are expertly designed to handle Australia’s harsh conditions. Southern Cross Ag Machinery Slashers are the perfect solution for land management. Certified to meet Australian Standards, these durable slashers come with a 3-Year Gearbox Warranty, giving you peace of mind with every purchase. Featuring high-quality components, including a gearbox, slip clutch, and PTO shaft from trusted brand Bare-Co, you can trust Southern Cross Ag Machinery Slashers for reliable performance. These versatile slashers are ideal for clearing vegetation such as grass, weeds, scrub, brush, and saplings, providing an eco-friendly method of natural weed control and reducing the need for excessive chemical use. Need help finding the right Southern Cross Ag Machinery Slasher for your needs? Our knowledgeable team is always available to assist. Contact your local KC Equipment branch today for expert advice and guidance.

Application

General purpose slashing

Features

• Australian Slasher Health and Safety Standards Compliant
• Hot dipped galvanised body
• 4mm deck
• Height adjustable skids with five different cuttings heights
• Bare-Co 45HP gearbox
• Bare-Co 6 inch slip clutch
• Bare-Co Series 4 PTO shaft
• Front and rear discharge deflectors (chain)
• Centre mount
• High tensile drag chain mounting system for durability
• Clear decks for easy maintenance
• Structural integrity located under deck with no impact on material flow
• Reinforced A-frame
• Cutter bar blade carrier system (Bare-Co Blades B6002)
• Wheel kits not available for this model
• Spare parts carried in stock
• Bare-Co components are readily available from KC Equipment
• Backed by Southern Cross Ag Machinery After Sales Service and Technical Support via KC Equipment Service and Repairs Department

Additional Information:

All prices include GST. Freight charges are extra. For sales or more information, contact your local KC Equipment branch today! Please note: Product images are for illustration purposes only. Actual products may vary. Prices are accurate at the time of posting but are subject to change.

Model

4SLA45GAL (4ft) Galvanised Slasher

Specifications

Recommended Tractor (HP)- 18-45hp Cutting Width (mm) – 1160mm Overall Width (mm) – 1350mm Cutting Height (mm) – 30-116mm Gross Weight (kg) – 233 KGS Number of Blades – 2 Blade Size (mm) – Bare-Co: B6002 Blade Tip Speed (m/s max.) – 66 Deck Thickness (mm) – 4.0 3-Point Hitch – Category One Gear Box / Capacity – Bare-Co 1:1.93 / 45HP PTO Driveline – Bare-Co 6 inch slip-clutch & series 4 PTO shaft Grass Discharge – Rear Discharge Blade Carrier System – Cutter Bar Optional Wheel Kit(s) – Not Available Offset – Not Available

Warranty

3 Year Gearbox Warranty

Description

This 3.6ft 45hp galvanised slasher is part of the Southern Cross Ag Machinery Slashers, which are expertly designed to handle Australia’s harsh conditions. Southern Cross Ag Machinery Slashers are the perfect solution for land management. Certified to meet Australian Standards, these durable slashers come with a 3-Year Gearbox Warranty, giving you peace of mind with every purchase. Featuring high-quality components, including a gearbox, slip clutch, and PTO shaft from trusted brand Bare-Co, you can trust Southern Cross Ag Machinery Slashers for reliable performance. These versatile slashers are ideal for clearing vegetation such as grass, weeds, scrub, brush, and saplings, providing an eco-friendly method of natural weed control and reducing the need for excessive chemical use. Need help finding the right Southern Cross Ag Machinery Slasher for your needs? Our knowledgeable team is always available to assist. Contact your local KC Equipment branch today for expert advice and guidance.

Application

General purpose slashing

Features

• Australian Slasher Health and Safety Standards Compliant
• Hot dipped galvanised body
• 2.5mm deck
• Height adjustable skids with five different cuttings heights
• Bare-Co 45HP gearbox. Gearbox supplied with oil (85/140 Gear Oil).
• Bare-Co 6 inch slip clutch
• Bare-Co Series 4 PTO shaft
• Front and rear discharge deflectors (chain)
• Centre mount
• High tensile drag chain mounting system for durability
• Clear decks for easy maintenance
• Structural integrity located under deck with no impact on material flow
• Reinforced A-frame
• Cutter bar blade carrier system (Bare-Co Blades B6002)
• Wheel kits not available for this model
• Spare parts carried in stock
• Bare-Co components are readily available from KC Equipment
• Backed by Southern Cross Ag Machinery After Sales Service and Technical Support via KC Equipment Service and Repairs Department

Additional Information:

All prices include GST. Freight charges are extra. For sales or more information, contact your local KC Equipment branch today! Please note: Product images are for illustration purposes only. Actual products may vary. Prices are accurate at the time of posting but are subject to change.

Model

3.6SLA45GAL (3’6ft) Galvanised Slasher

Specifications

Recommended Tractor (HP)- 16-40hp Cutting Width (mm) – 1058mm Overall Width (mm) – 1208mm Cutting Height (mm) – 30-116mm Gross Weight (kg) – 197 KGS Number of Blades – 2 Blade Size (mm) – Bare-Co: B6002 Blade Tip Speed (m/s max.) – 58 Deck Thickness (mm) – 3.0 3-Point Hitch – Category One Gear Box / Capacity – Bare-Co 1:1.93 / 45HP PTO Driveline – Bare-Co Series 4 PTO / Shaft & 6” Slip Clutch Grass Discharge – Rear Discharge Blade Carrier System – Cutter Bar Optional Wheel Kit(s) – Not Available Offset – Not Available

Warranty

3 Year Gearbox Warranty

Description

DieselPro range tanks are manufactured with a diesel grade polyethylene that is UV stabilised and impact resistant. Our heavy duty reliable 12V pumps are from Italy, made by PIUSI, a world class pump manufacturer. Also features a lockable filling cap and a lockable pump cover to protect your diesel.

Application

Diesel Transfer Equipment

200L, 400L & 600L Features

• Low Profile design for clear rear view on a utility vehicle
• 12V PIUSI Self-priming pump
• 45L/Min open flow
• High quality auto shut off nozzle
• 5m of 3/4″ delivery hose with swivel and crimped fittings
• Strong double walled lockable pump cover (padlock incl.) protects the pump and tank breather from unwanted access
• Lockable filling cap with 2 keys
• 4m wiring harness with alligator clips
• Suction foot screen filter on internal suction line
• 30 min duty cycle, 30 min on/off
• Baffled tank (400 and 600L)
• Anti static earth strap
• Tank Bottom 8mm Brass inserts for bolt down mounting to a tray, skid or platform – 600L only

400L Features

• IBC approved container for diesel fuel
• Worksafe Victoria approval number 30315

Models

SQDN200L-Z1 (200L)
SQDN400L-Z1 (400L)
SQDN600L-X1 (600L)

Description

The Selecta 12V DieselPower transfer units are available from 100L to 400L capacity. Tanks are made from a diesel grade polyethylene that are impact resistant and UV stabilised. Proven and reliable Selecta DieselPower pumps are the heart of this rugged product.

Application

Diesel Transfer Equipment

Key Features

• 12V DieselPower Self-priming pump
• 40 L/Min open flow
• High quality auto shut-off nozzle
• Strong double walled lockable pump cover (padlock incl.) protects the pump and tank breather from unwanted access (100, 200 and 400L)
• Lockable filling cap with 2 keys (100, 200 and 400L)
• Suction foot screen filter on internal suction line
• 4m of 3/4” delivery hose with swivel and crimped fittings
• 4m wiring harness with alligator clips
• 30 min duty cycle, 30 min on/off
• Baffled tank (300 and 400L)
• Low profile design (100, 200 & 400L)
• SquatPak design (300L)

Models

SQDN100-1 (100L)
SQDN200-7 (200L)
SQD300-7 (300L)
SQDN400-7 (400L)

Description

The Selecta Rakpak sprayer has been designed to fit neatly on most ATV bikes and meet the strict weight requirement of these vehicles. This model features a constant flow, no pulsation Smoothflo pump.

Application

Spot Spraying from ATVs

Key Features

• 7 L/min open flow (690 kPa/120 psi) Smoothflo Pump
• Spotjet spray gun with adjustable 30° offset cone jet nozzle
• UV stabilised Polytuff tanks made in Australia
• 6 metres of 8mm ID high quality delivery hose
• Hold down straps to secure to vehicle
• 3 metre wiring loom for connection to 12volt DC power
• Lance holder to secure gun while travelling
• Antispill barrier around lid to protect rider
• Drain tap for easy drainage
• Internal baffles to reduce surge
• No pressure regulator required to deliver constant flow without pulsation

Models

RP70N-S7
RP70N-S3 (Deluxe Model)

Description

Ideal for weed control, spot and fence line spraying applications, the Smoothflo series deliver constant flow, no pulsation and the highest pressure for distance spraying. Suitable for use on quad bikes, side-by-side utes, trays & trailers, with UV stabilised Polytuff tanks to ensure long life.

Application

Spot Spraying

Key Features

• UV stabilised Polytuff tank suitable for agricultural chemical spraying
• 7 L/min open flow (690 kPa/120 psi) Smoothflo Pump, (DDP-552), Viton valves and Santoprene diaphragm ON/OFF Switch
• 6 metres of 8mm delivery hose
• Quality Spotjet spray gun with adjustable spray nozzle
• 3 metre wiring harness with in line fuse and alligator clips

Models

SP50-S7 (50L)
SP100-S7 (100L)
SP200-S7 (200L)

Description

The latest addition to the Silvan Selecta Spotpak range is the ideal unit for use on an ATV or similar mobile vehicle for spot spraying, fence line, row or general maintenance needs. Designated as the Spotpak 12V Redline model, the sprayers feature a UV stabilised Polytuff polypropylene tank and is a supplied as a self contained complete unit.

Application

Spot Spraying

Key Features

• Spot Spray gun with 550mm stainless steel lance extension with adjustable cone nozzle
• 6m of delivery hose
• 3 metres of battery cable with alligator clips
• Lid with anti-spill breather with lid retaining ring to prevent accidental loss
• Chemical Measuring Jug 650ml (keeps safely beneath the lid)
• 2.5L/min open flow or 50psi (max)
• U.V. Stabilized Poly-tuff Tank, with clip in holding points for spray gun and inserts

Models

SP25-R1 (25L)
SP55-R1 (55L)
SP100-R2 (100L)

Description

Muthing mulchers are a premium range of flail mowers, designed and engineered in Germany. The Muthing Mulching System provides many benefits for groundcare management, including weed control, pest control, input cost reductions (fertilisers, pesticides and herbicides) and improvement in soil structure and fertility.

Muthing mulchers are not only better designed, but also provide a safer working environment by reducing the risk of thrown objects. Muthing mulchers up to a 3.2m width have undergone Independent Thrown Object Certification and comply with Thrown Object Testing ISO/WD 17101-2. This ensures better public safety when operating in public spaces or roadside – a crucial consideration for councils and their suppliers.

For full specifications and a better look at the MU-O Vario Range, please download the brochure.

Features

Five Reasons To Own A Muthing

• German engineering and quality at its best – manufactured in Europe.
• No windrows – finely mulched and de-fibered material is spread evenly behind roller.
• Spiral Rotor with double forged ‘M Hammer’ Flails – the ultimate in reliability and longevity.
• Patented removable and segmented ‘Shark Fin’ shredding bars for a high quality shred and reduction in maintenance costs.
• Designed to be safer for vehicle traffic and passers by – Muthing mulchers have Thrown Object Certification.

MU-O Vario Standard Equipment

• The MU-O is designed for orchard or vineyard applications, and has a multi-position roller and pruning rakes. This machine facilitates very effective mulching practices in both pruning and grass or pasture management.
• Manufactured from High Quality QSt/E Steel with multi position headstock Cat. I + II for front and rear mounting
• Rear mounting with mechanical side shift; MU-O 180 – 250 Vario: 56 cm
• Gearbox with integrated over run clutch and through drive for 540 / 1.000 rpm
• Belt protection with tension measuring slot
• High tempered “M” Hammer flails to ensure clean cut and maximum shredding using less power
• Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear
• Patented removable shredding bar – System: “Shark fin”
• Support roller to carry the flail, adjustable for different heights of the mulching system, with “Starinth” Roller Bearing
• High tempered spring steel one way protection flaps in front of the mower hood
• Optimised distance between the outer rotor circle and the support roller guarantees perfect contour following and an even quality of cut
• Spreads the shredded material evenly behind the support roller
• Excellent Mulching Quality
• Side skids
• PTO shaft with hardened inner pipe and cap bottom lubrication

Optional Upgrades & Attachments

• Front and rear headstock Cat. I + II (shiftable or fixed mounted), support leg, central mounting
• Central mounting for MU-O 180 – 250 Vario
• Hydraulic side shift (1 double acting spool valve required) MU-O 180 – 250 Vario: 56 cm lifting range
• Front shock-absorbing spring assembly required
• Alternatively we recommend Hydraulic Weight Transfer MU-SOFA®
• Alternative flails and rotor systems (triple Y-blades, “M”-Shackle flails)
• Adjustable cutting bar (Vario)
• Hood Wear plate
• Carbide wearing skids, removable, incl. baffle plate
• Second patented removable shredding bar – System: “Shark fin”
• Operating hours counter with sensor, time recording via angular momentum
• Lighting equipment support bolted onto the 3-point trestle

Models

MU-O 180 Vario – 1800mm working width, 16 flails
MU-O 200 Vario – 2000mm working width, 16 flails
MU-O 220 Vario – 2200mm working width, 18 flails
MU-O 250 Vario – 2500mm working width, 22 flails

Distributor’s Website

Southern Cross Ag Machinery – www.sxm.com.au

Description

Muthing mulchers are a premium range of flail mowers, designed and engineered in Germany. The Muthing Mulching System provides many benefits for groundcare management, including weed control, pest control, input cost reductions (fertilisers, pesticides and herbicides) and improvement in soil structure and fertility.

Muthing mulchers are not only better designed, but also provide a safer working environment by reducing the risk of thrown objects. Muthing mulchers up to a 3.2m width have undergone Independent Thrown Object Certification and comply with Thrown Object Testing ISO/WD 17101-2. This ensures better public safety when operating in public spaces or roadside – a crucial consideration for councils and their suppliers.

For full specifications and a better look at the MU-FM Range, please download the brochure.

Features

Five Reasons To Own A Muthing

• German engineering and quality at its best – manufactured in Europe.
• No windrows – finely mulched and de-fibered material is spread evenly behind roller.
• Spiral Rotor with double forged ‘M Hammer’ Flails – the ultimate in reliability and longevity.
• Patented removable and segmented ‘Shark Fin’ shredding bars for a high quality shred and reduction in maintenance costs.
• Designed to be safer for vehicle traffic and passers by – Muthing mulchers have Thrown Object Certification.

MU-FM Standard Equipment

• Manufactured from High Quality QSt/E Steel for Front mounting onto professional Front Mowers with 2 point linkage
• Linkage designed for high lift to clear kerbs
• Gearbox mounted to the rear of the hood complete with integrated over run clutch for 2500 rpm
• Belt protection with tension measuring slot
• Shackle “M” Carbide flails to ensure long life, clean cut and maximum shredding using less power
• Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear
• Roller with rounded edges to preserve the soil and turf and to carry the flail with variable height adjustment
• Easy to use variable height adjustment
• Wearing skids
• High tempered spring steel one way protection flaps in front of the mower
• Optimised distance between the outer rotor circle and the roller as well as the linkage parts with wide swivelling range guarantees perfect contour following and an even quality of cut
• Purposely designed hood in conjunction with high rotor and cutting speeds and a removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality
• Patented removable shredding bar – System: “Shark Fin”
• PTO shaft and Guarding to ISO Standards

Optional Upgrades & Attachments

• A-frame Cat. 0
• Second patented removable shredding bar – System: “Shark Fin”
• Strong, height adjustable rubber wheels, 360º swivel in front of the flail
• Special speed ratio for Kubota – please order for Kubota

Models

MU-FM 140 – 1400mm working width, 24 flails
MU-FM 160 – 1600mm working width, 28 flails

Distributor’s Website

Southern Cross Ag Machinery – www.sxm.com.au

Description

Muthing mulchers are a premium range of flail mowers, designed and engineered in Germany. The Muthing Mulching System provides many benefits for groundcare management, including weed control, pest control, input cost reductions (fertilisers, pesticides and herbicides) and improvement in soil structure and fertility.

Muthing mulchers are not only better designed, but also provide a safer working environment by reducing the risk of thrown objects. Muthing mulchers up to a 3.2m width have undergone Independent Thrown Object Certification and comply with Thrown Object Testing ISO/WD 17101-2. This ensures better public safety when operating in public spaces or roadside – a crucial consideration for councils and their suppliers.

For full specifications and a better look at the MU-PRO Vario Range, please download the brochure.

Features

Five Reasons To Own A Muthing

• German engineering and quality at its best – manufactured in Europe.
• No windrows – finely mulched and de-fibered material is spread evenly behind roller.
• Spiral Rotor with double forged ‘M Hammer’ Flails – the ultimate in reliability and longevity.
• Patented removable and segmented ‘Shark Fin’ shredding bars for a high quality shred and reduction in maintenance costs.
• Designed to be safer for vehicle traffic and passers by – Muthing mulchers have Thrown Object Certification.

MU-PRO Vario Standard Equipment

• Manufactured from High Quality QSt/E Steel with multi position headstock Cat. II + III for front and rear mounting
• Hydraulic side shift: 56 cm lifting range (1 double acting spool valve required)
• Heavy duty gearbox with integrated over run clutch and through drive for 1.000 rpm
• Automatic belt tensioning
• High tempered “M” Hammer flails to ensure clean cut and maximum shredding using less power
• Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear
• Patented removable shredding bar – System: “Shark fin”
• Large pivoting rear support roller for depositing mulch material either behind or in front of the roller, adjustable to different heights, with “Starinth” Roller Bearing
• Side wearing skids
• Carbide wearing skids, removable
• High tempered one way spring steel protection flaps in front of the mower hood
• Support leg
• Slotted holes in the lower link receiver for perfect contour following and an even quality cut
• Spreads the shredded material evenly behind the support roller
• Excellent Mulching Quality
• Heavy duty PTO shaft with hardened inner pipe and cap bottom lubrication

Optional Upgrades & Attachments

• Front shock-absorbing spring assembly required
• Alternatively we recommend Hydraulic Weight Transfer MU-SOFA®
• Alternative flails and rotor systems (triple Y-blades, “M”-Shackle flails)
• Adjustable cutting bar (Vario)
• Second patented removable shredding bar – System: “Shark fin”
• Wear insert in housing
• Cleaner cutting edge for displaced support roller
• Refitting to an output speed of 750 rpm instead of 1.000 rpm (additional)
• Height adjustable support wheels, fixed axle with track 1.85 m, mounted at the 3-Point linkage
• Warning signs with LED lighting equipment for front and rear mounting (5 m cable is included)
• Lighting equipment support bolted onto the 3-point trestle
• Operating hours counter with sensor, time recording via angular momentum

Models

MU-PRO 250 Vario – 2500mm working width, 22 flails
MU-PRO 280 Vario – 2800mm working width, 24 flails
MU-PRO 300 Vario – 3000mm working width, 26 flails
MU-PRO 320 Vario – 3200mm working width, 28 flails

Distributor’s Website

Southern Cross Ag Machinery – www.sxm.com.au

Description

Muthing mulchers are a premium range of flail mowers, designed and engineered in Germany. The Muthing Mulching System provides many benefits for groundcare management, including weed control, pest control, input cost reductions (fertilisers, pesticides and herbicides) and improvement in soil structure and fertility.

Muthing mulchers are not only better designed, but also provide a safer working environment by reducing the risk of thrown objects. Muthing mulchers up to a 3.2m width have undergone Independent Thrown Object Certification and comply with Thrown Object Testing ISO/WD 17101-2. This ensures better public safety when operating in public spaces or roadside – a crucial consideration for councils and their suppliers.

For full specifications and a better look at the MU-M Vario Range, please download the brochure.

Features

Five Reasons To Own A Muthing

• German engineering and quality at its best – manufactured in Europe.
• No windrows – finely mulched and de-fibered material is spread evenly behind roller.
• Spiral Rotor with double forged ‘M Hammer’ Flails – the ultimate in reliability and longevity.
• Patented removable and segmented ‘Shark Fin’ shredding bars for a high quality shred and reduction in maintenance costs.
• Designed to be safer for vehicle traffic and passers by – Muthing mulchers have Thrown Object Certification.

MU-L Vario Standard Equipment

• Manufactured from High Quality QSt/E Steel with heavy duty multi position Headstock Cat. II for front and rear mounting
• Hydraulic side shift: 56 cm lifting range (1 double acting spool valve required)
• Gearbox with integrated over run clutch and through drive for 1000 rpm
• Automatic belt tensioning
• High tempered “M“ Hammer flails with self sharpening cutting edge to ensure a clean cut and maximum shredding using less power
• Spiral rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear
• Large self-cleaning roller to carry the flail mower, adjustable for different heights
• Wearing skids
• Stand
• P.T.O. shaft and guarding to ISO Standards
• Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut
• Purposely designed hood in conjunction with high rotor and cutting speeds and a fixed shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality
• Patented removable shredding bar – System: “Shark Fin”

Optional Upgrades & Attachments

• Shock absorbing linkage springs (recommended for Front Mounting)
• Hydraulic Weight Transfer MU-SOFA® (recommended for Front Mounting)
• Second patented removable shredding bar – System: “Shark Fin”
• Hood Wear plate
• Warning signs and lights
• Galvanised frame for Warning signs and lights to be mounted on for Front and Rear Headstock Cat.II
• Heavy P.T.O. shaft with cap bottom lubrication
• Height adjustable rubber wheels with fixed axle
• Working hours meter with electronic sensor
• Alternative flails and rotor systems (3 back to back Flails, M Shackle Flails)

Models

MU-M 220 – 2200mm working width, 18 flails
MU-M 250 – 2500mm working width, 22 flails
MU-M 280 – 2800mm working width, 24 flails
MU-M 300 – 3000mm working width, 26 flails

Distributor’s Website

Southern Cross Ag Machinery – www.sxm.com.au

Description

Muthing mulchers are a premium range of flail mowers, designed and engineered in Germany. The Muthing Mulching System provides many benefits for groundcare management, including weed control, pest control, input cost reductions (fertilisers, pesticides and herbicides) and improvement in soil structure and fertility.

Muthing mulchers are not only better designed, but also provide a safer working environment by reducing the risk of thrown objects. Muthing mulchers up to a 3.2m width have undergone Independent Thrown Object Certification and comply with Thrown Object Testing ISO/WD 17101-2. This ensures better public safety when operating in public spaces or roadside – a crucial consideration for councils and their suppliers.

For full specifications and a better look at the MU-L Vario Range, please download the brochure.

Features

Five Reasons To Own A Muthing

• German engineering and quality at its best – manufactured in Europe.
• No windrows – finely mulched and de-fibered material is spread evenly behind roller.
• Spiral Rotor with double forged ‘M Hammer’ Flails – the ultimate in reliability and longevity.
• Patented removable and segmented ‘Shark Fin’ shredding bars for a high quality shred and reduction in maintenance costs.
• Designed to be safer for vehicle traffic and passers by – Muthing mulchers have Thrown Object Certification.

MU-L Vario Standard Equipment

• Manufactured from High Quality QSt/E Steel with multi position Headstock
• Cat. I + II for Front or Rear mounting with mechanical side shift; MUL 180 – 280: 56 cm (as shown)
• Gearbox with integrated over run clutch and through drive for 540 / 1000 rpm
• Belt protection with tension measuring slot
• High tempered “M” Hammer flails to ensure clean cut and maximum shredding using less power
• Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear
• “Starinth” Roller with internal bearings and well rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights; Wearing skids, High tempered spring steel one way protection flaps in front
• Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut
• Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Patented removable shredding bar – System: “Shark Fin”
• PTO shaft and Guarding to ISO Standards

Optional Upgrades & Attachments

• Shock absorbing linkage springs (recommended for Front Mounting)
• Hydraulic Weight Transfer MU-SOFA® (recommended for Front Mounting)
• Hydraulic side shift (1 double acting spool valve required) MUL 180 – 280 : 56 cm lifting range
• Height adjustable rubber wheels, 360º swivel with adjustable width for rear mounting (replacing the roller or in addition to the roller)
• Warning signs and lights
• Hood Wear plate
• Additional Carbide wearing skids, removable
• Second patented removable shredding bar – System: “Shark Fin”
• Alternative flails and rotor systems (3 back to back Flails, M Shackle Flails)
• Working hours meter with electronic sensor

Models

MU-L 180 – 1800mm working width, 16 flails
MU-L 200 – 2000mm working width, 16 flails
MU-L 220 – 2200mm working width, 18 flails
MU-L 250 – 2500mm working width, 22 flails
MU-L 280 – 2800mm working width, 24 flails

Distributor’s Website

Southern Cross Ag Machinery – www.sxm.com.au

Description

Muthing mulchers are a premium range of flail mowers, designed and engineered in Germany. The Muthing Mulching System provides many benefits for groundcare management, including weed control, pest control, input cost reductions (fertilisers, pesticides and herbicides) and improvement in soil structure and fertility.

Muthing mulchers are not only better designed, but also provide a safer working environment by reducing the risk of thrown objects. Muthing mulchers up to a 3.2m width have undergone Independent Thrown Object Certification and comply with Thrown Object Testing ISO/WD 17101-2. This ensures better public safety when operating in public spaces or roadside – a crucial consideration for councils and their suppliers.

For full specifications and a better look at the MU-H/S Vario Range, please download the brochure.

Features

Five Reasons To Own A Muthing

• German engineering and quality at its best – manufactured in Europe.
• No windrows – finely mulched and de-fibered material is spread evenly behind roller.
• Spiral Rotor with double forged ‘M Hammer’ Flails – the ultimate in reliability and longevity.
• Patented removable and segmented ‘Shark Fin’ shredding bars for a high quality shred and reduction in maintenance costs.
• Designed to be safer for vehicle traffic and passers by – Muthing mulchers have Thrown Object Certification.

MU-H/S Vario Standard Equipment

• Manufactured from High Quality QSt/E Steel with Headstock
• Cat. II for Rear mounting
• Hydraulic parallelogram side shift
• Patented Safety Mechanical Break Away System
• Working angle 90° up to 60° down
• Gearbox with integrated over run clutch for 540 rpm
• Belt protection with tension measuring slot
• Hydraulic transport safety lock at an angle of 90° with shut-off tap, (2 double acting spool valves required, at least one with floating position)
• Stand
• High tempered “M” Hammer flails to ensure clean cut and maximum shredding using less power
• Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear
• Roller with internal bearings and well-rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights
• Wearing skids
• High tempered one way spring steel protection flaps in front of the mower hood
• Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut
• Purposely designed hood in conjunction with high rotor and cutting speeds and patented removable shredding bar – System: “Shark Fin” spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality
• PTO shaft and Guarding to ISO Standards

Optional Upgrades & Attachments

• Hood Wear plate
• Additional Carbide wearing skids, removable
• Second patented removable shredding bar – System: “Shark Fin”
• Controls with Bowden cable operation (150cm): 1 double acting or 1 single acting spool valve with free flow return required
• Warning signs and lights
• Working hours meter with electronic sensor
• Alternative flails and rotor systems (3 back to back Flails, M Shackle Flails)
• Right and left hand offset options available

Models

MU-H/S 140 – 1200mm working width, 12 flails
MU-H/S 160 – 1600mm working width, 14 flails
MU-H/S 180 – 1800mm working width, 16 flails
MU-H/S 200 – 2000mm working width, 16 flails

Distributor’s Website

Southern Cross Ag Machinery – www.sxm.com.au

Description

Muthing mulchers are a premium range of flail mowers, designed and engineered in Germany. The Muthing Mulching System provides many benefits for groundcare management, including weed control, pest control, input cost reductions (fertilisers, pesticides and herbicides) and improvement in soil structure and fertility.

Muthing mulchers are not only better designed, but also provide a safer working environment by reducing the risk of thrown objects. Muthing mulchers up to a 3.2m width have undergone Independent Thrown Object Certification and comply with Thrown Object Testing ISO/WD 17101-2. This ensures better public safety when operating in public spaces or roadside – a crucial consideration for councils and their suppliers.

For full specifications and a better look at the MU-H Vario Range, please download the brochure.

Features

Five Reasons To Own A Muthing

• German engineering and quality at its best – manufactured in Europe.
• No windrows – finely mulched and de-fibered material is spread evenly behind roller.
• Spiral Rotor with double forged ‘M Hammer’ Flails – the ultimate in reliability and longevity.
• Patented removable and segmented ‘Shark Fin’ shredding bars for a high quality shred and reduction in maintenance costs.
• Designed to be safer for vehicle traffic and passers by – Muthing mulchers have Thrown Object Certification.

MU-H Vario Standard Equipment

• Manufactured from High Quality QSt/E Steel with multi position Headstock Cat. I + II for Front or Rear mounting with mechanical side shift; MUH 140 – 150: 40 cm; MUH 160 – 220: 56 cm
• Gearbox with integrated over run clutch and through drive for 540 / 1000 rpm
• Belt protection with tension measuring slot
• High tempered “M” Hammer flails to ensure clean cut and maximum shredding using less power
• Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear
• Roller with internal bearings and rounded edges to preserve the soil and turf and to carry the flail, adjustable for different heights, wearing skids
• High tempered spring steel one way protection flaps in front of the mower hood
• Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut
• Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality
• Patented removable shredding bar – System: “Shark Fin”
• PTO shaft and Guarding to ISO Standards

Optional Upgrades & Attachments

• Shock absorbing linkage springs (recommended for Front Mounting)
• Hydraulic Weight Transfer MU-SOFA® (recommended for Front Mounting)
• Hydraulic side shift (1 double acting spool valve required) 140-150 : 40 cm / 160-220 : 56 cm lifting range
• Height adjustable rubber wheels, 360º swivel with adjustable width for rear mounting (replacing the roller or in addition to the roller)
• Warning signs and lights
• Hood Wear plate
• Additional Carbide wearing skids, removable
• Second patented removable shredding bar – System: “Shark Fin”
• Alternative flails and rotor systems (3 back to back Flails, M Shackle Flails)
• Working hours meter with electronic sensor

Models

MU-H 120 – 1200mm working width, 10 flails
MU-H 140 – 1400mm working width, 12 flails
MU-H 150 – 1500mm working width, 12 flails
MU-H 160 – 1600mm working width, 14 flails
MU-H 180 – 1800mm working width, 16 flails
MU-H 200 – 2000mm working width, 16 flails
MU-H 200-RAKE – 2000mm working width, 16 flails
MU-H 220 – 2200mm working width, 18 flails
MU-H 220-RAKE – 2200mm working width, 18 flails

Distributor’s Website

Southern Cross Ag Machinery – www.sxm.com.au